NPI Engineer jobs in Israel

About The Position Razor Labs builds manufacturing lines for its own hardware. We're looking for a hands-on systems engineer to lead prototyping and low-volume assembly (tens to hundreds of units) — taking hardware from first builds to a repeatable process, designed with scale-up and BOM cost in mind. Responsibilities Lead prototype and pilot builds; turn lessons into a repeatable assembly process. Plan assembly flows, fixtures/jigs, and the right (minimal) automation — engineering simplicity first. Own the project plan (Gantt) and budget; design for scale-up with BOM cost awareness and DFM feedback to R&D. Define test and inspection strategy, including environmental testing where needed. Measure and improve yield and rework with data; work daily with R&D, production, and vendors on the floor. Requirements B.Sc. in Electrical Engineering or related field. 7+ years of proven hands-on experience in manufacturing/NPI of electro-mechanical products. Experience taking hardware from prototype to production, even at low volumes. Automation and tooling know-how (fixtures, PLCs, sensors) — and the judgment of when not to automate. Applied statistics and SW tools: Gantt/project planning, advanced Excel, data analysis (Minitab/JMP/Python or similar). Practical experience with AI tools (ChatGPT, Claude) for work automation — building workflows, agents/skills, and using them to accelerate engineering tasks. Budget ownership and vendor procurement experience. Excellent interpersonal skills. Excellent English, written and spoken. Problem-solver with a can-do attitude — takes ownership and gets things built.

Description About the role: Lumenis is a global leader in energy-based solutions for Aesthetics and Eye Care. With more than 1000 employees worldwide and sales in over 100 countries, we are headquartered in Yokneam and have offices in Tel-Aviv. We are looking for an NPI Engineer for the R&D team. The NPI Engineer will own the end-to-end transition of multidisciplinary medical devices from R&D prototypes to stable, scalable serial production, serving as the bridge between product development and Operations. If you want to work in an innovative, international environment and help push the boundaries of healthcare, well-being, and energy-based technology, this is your opportunity! Key responsibilities: · Lead the full NPI and design-transfer process from R&D handoff through pilot builds, qualification, production ramp-up, and stabilization. · Build and drive transfer plans, schedules, risk and action tracking, production-readiness criteria, and release gates. · Create and maintain the manufacturing package, including BOM/DMR content, drawings, work instructions, test methods, acceptance criteria, tooling, and training materials. · Lead DFM, DFA, and DFT reviews and drive design and process improvements that support quality, manufacturability, serviceability, and cost. · Define, develop, and qualify manufacturing processes, fixtures, equipment, and test setups; prepare and execute validation protocols where applicable. · Lead ECOs and configuration changes, and provide hands-on support for production, yield, quality, field, and obsolescence issues using structured root-cause and corrective-action methods. · Serve as the technical focal point across R&D, Operations, QA/RA, Supply Chain, Service, suppliers, subcontractors, and contract manufacturers. Requirements Requirements: · B.Sc. in Mechanical, Electrical, Biomedical, Mechatronics, or a related engineering discipline. · At least 3 years of experience in NPI, manufacturing engineering, product engineering, or design transfer for multidisciplinary products. · Proven experience supporting pilot and serial production and developing or improving manufacturing processes. · Experience with engineering documentation, BOM/DMR structures, ECO/CO processes, and PLM/PDM and ERP systems. · Strong hands-on troubleshooting, root-cause analysis, and structured problem-solving skills. · Ability to read and interpret engineering drawings, specifications, and technical documentation; SolidWorks experience is preferred. · Fluent Hebrew and English, written and spoken; medical-device or other regulated-industry experience is an advantage. Education & Experience - Relevant engineering degree and 3+ years of experience in multidisciplinary product industrialization. Product & Business Acumen - Understands how design choices affect product quality, supply continuity, serviceability, cost, and time to market. Execution & Leadership - Owns deliverables end to end, prioritizes effectively, and leads cross-functional actions without direct authority. Communication & Collaboration - Builds strong working relationships and communicates status, risks, and decisions clearly across functions and sites. Other Requirements - Comfortable working in a dynamic, global, matrix organization and providing hands-on support when needed. Self-Starter & Problem-Solver - Proactive and resourceful; turns ambiguous technical issues into structured, evidence-based action plans. Detail-Oriented & Analytical - Uses data, documentation discipline, and sound engineering judgment to ensure repeatable and compliant execution. Technical Skills - Manufacturing documentation, DFM/DFA/DFT, ECO and configuration control, RCA, process validation, PLM/PDM/ERP, and CAD/SolidWorks. Here’s why you will LOVE working at Lumenis: Develop your expertise and exercise your creativity while making a true DIFFERENCE in people’s lives. Work at a company with a 60+ year legacy of groundbreaking innovation that remains a market leader in its domains. Benefit from personal growth opportunities and drive decisions that shape the future of our products, processes, and business culture.

Description Power the Future with us! SolarEdge (NASDAQ: SEDG), is a global leader in high-performance smart energy technology, and millions of products installed in over 133 countries. Our diverse product offering comprises intelligent solar inverters, battery storage, backup systems, EV charging, and complete home energy management ecosystems. By leveraging world-class engineering capabilities and with a relentless focus on innovation, we strive to create a world where clean, green energy from the sun is the primary source of power for our homes, businesses, and just about everywhere we thrive. As a Q&R Process Engineer, you will serve as the critical link between design and mass production. You will ensure product integrity, optimize manufacturing workflows, and drive continuous quality improvement across the entire product lifecycle. Key Responsibilities • Design & Development: Lead cross-functional reviews of engineering samples, drawings, and BOMs to mitigate quality risks during early production phases. • DFM & Reporting: Generate and analyze Design for Manufacturing (DFM) reports to document discrepancies and champion process optimization. • Supplier & Material Quality: Oversee inspection and testing of early-run materials; partner with suppliers to resolve quality issues and close the Corrective and Preventive Action (CAPA) loop. • Pilot Production: Manage pilot runs with a focus on reliability and traceability. Validate equipment, fixtures, and Work Instructions (WI) to ensure all design requirements are met. • Performance Monitoring: Analyze production yields and quality metrics, collaborating with Contract Manufacturers (CM) to develop and execute improvement plans. • Quality Control: Establish robust QC inspection guidelines and set up quality control points for initial batches; provide hands-on training and oversight to the QC team. • Issue Management: Proactively manage and monitor all engineering and quality concerns from identification through to final resolution. Requirements  • Education: B.Sc. in Mechanical, Materials, or Electronics Engineering. • Experience: 3+ years of experience in NPI (New Product Introduction) and mass production within the electronics industry. • Technical Skills: Deep expertise in electronics quality standards, including SCAR, 8D, MRB, IQC, and Sampling Plans. Experience with audit methodologies is a significant advantage. • Engineering Knowledge: Strong command of electronic manufacturing technologies, failure analysis (FA), NPI workflows, and technical drawing interpretation (including advanced measurement methodologies). • Soft Skills: Self-motivated and task-oriented with the ability to work effectively both independently and within a cross-functional management environment. • Language: Native or professional-level fluency in English (written and spoken). Work Location & Travel • Primary Location: Ziporit Industrial Zone (approx. 4 days per week). • Secondary Location: Herzliya (1 day per week). • Travel: Ability to travel internationally approximately two weeks per quarter.

NPI Engineer Description - We are looking for NPI Engineer to lead the development, scale‑up, and optimization of ink manufacturing processes. In this role, you will drive process and technology projects, define robust manufacturing procedures, and work closely with R&D and global engineering teams to ensure smooth product introduction into production Job Responsibilities: • Responsible for ink manufacturing process: own, optimize and improve process performance. • Investigate process and equipment issues through hands-on analysis and root-cause methodologies. • Define new processes & specifications for stable, high-quality production. • Collaborate with R&D, Operations, and Singapore engineering teams to align on processes and technology. • Deliver NPI products, working windows, and manufacturing instructions to the production team, including specifications and procedures. • Ensure engineering deliverables and documentation for new processes meet project specifications. • Lead process problem-solving. Requirements • B.Sc. in Chemical Engineering; M.Sc. in Chemical/Materials Engineering – advantage. • 5+ years as a NPI or process engineer in a multidisciplinary production environment. • Experience in mechanical/equipment engineering – significant advantage. • Creative thinker with strong investigative skills and the ability to apply tools and technologies to deliver effective solutions. • Background in plastics, cosmetics, or related industries – advantage. • Strong analytical skills, and ability to work on multiple projects. • Positive can‑do, hands‑on attitude. • Excellent communication and teamwork abilities. #LIPOST Job - Engineering Schedule - Full time Shift - No shift premium (Israel) Travel - Relocation - Equal Opportunity Employer (EEO) - HP, Inc. provides equal employment opportunity to all employees and prospective employees, without regard to race, color, religion, sex, national origin, ancestry, citizenship, sexual orientation, age, disability, or status as a protected veteran, marital status, familial status, physical or mental disability, medical condition, pregnancy, genetic predisposition or carrier status, uniformed service status, political affiliation or any other characteristic protected by applicable national, federal, state, and local law(s). Please be assured that you will not be subject to any adverse treatment if you choose to disclose the information requested. This information is provided voluntarily. The information obtained will be kept in strict confidence. For more information, review HP’s EEO Policy or read about your rights as an applicant under the law here: “Know Your Rights: Workplace Discrimination is Illegal"

Description About DriveNets DriveNets is a leader in high-scale networking software for AI infrastructure and service providers. The company pioneered a disaggregated networking architecture that transforms the economics of large-scale networks while maximizing performance, utilization, and operational efficiency. DriveNets-powered networks are deployed by global leaders, including AT&T and Comcast, supporting more than 30% of total U.S. internet traffic. DriveNets AI Fabric delivers full-stack networking for AI infrastructures, providing the highest-performance, Ethernet-based alternative to InfiniBand. The solution is deployed by hyperscalers, NeoClouds, and enterprises worldwide. With over $1B raised, DriveNets continues to push the boundaries of modern networking infrastructure. About the Role We are looking for an NPI & System Product Engineer to drive the transition of advanced networking switches and data center infrastructure systems from late-stage R&D validation & NPI into scalable mass production. In this role, you will lead the handoff from DVT completion into PVT entry, support the setup and deployment of new production lines at global Contract Manufacturers, and execute capacity ramp-up plans toward High-Volume Manufacturing. You will serve as the technical operational link between R&D design/NPI teams and factory lines, ensuring line balancing, fixture readiness, yield optimization, and hands-on root-cause failure analysis (RCA). Key Responsibilities Production Readiness: • Support the technical handoff from R&D DVT exit to Operations PVT readiness. • Track and verify closure of open DVT hardware issues, check BOM readiness, and validate manufacturing gating criteria before mass production. • Execute PVT build plans to ensure product design tolerances align with factory process capabilities. New Production Line Setup & Deployment: • Participate in the setup, line balancing, and deployment of new manufacturing lines and assembly workcells for chassis and full-rack integrated systems at CM facilities. • Validate physical workstation setups, line assembly flows, operator guidelines, and improve processes. • Verify assembly fixtures, press-fit tooling, and automated test stations during new line deployment. • Create and maintain production test procedures. Capacity Ramp-Up & Takt Time Optimization: • Monitor station takt times, identify line bottlenecks, and drive cycle-time reduction initiatives. • Support the duplication and operational verification of line fixtures, tooling, and test stations to meet capacity scaling targets. • Track production ramp-up from pilot runs through full-rate High-Volume Manufacturing. System Product Engineering & Yield Optimization: • Monitor key manufacturing metrics across PCBA & box-build assembly lines: First Pass Yield (FPY), Line Fallout, and Scrap Rate. • Use Statistical Process Control (SPC) and factory telemetry logs to identify systemic yield detractors. • Assist in refining production test limits, calibration procedures, and screening guardbands during volume ramp. Root Cause Analysis (RCA) & Debugging: • Perform hands-on failure triage on system-level dropouts, intermittent hardware faults, and line fallouts during PVT and ramp-up. • Use schematics, Cadence Allegro board layouts, scopes, JTAG, and diagnostic tools to isolate component vs. process defects. Requirements • B.Sc. in Electrical Engineering, Computer Engineering, or equivalent technical degree. • 3–5 years of hands-on NPI / System Product Engineering experience specifically in high-performance telecommunications, data center networking switches/routers, enterprise servers, optical hardware. • Hands-on experience participating in DVT-to-PVT transitions, new production line setup, and factory volume ramp-ups at CM facilities. • Solid understanding of electronics production processes (Press-fit, boundary scan, functional tests, thermal stress chambers, box-build, and rack integration). • Good understanding of complex digital architectures: high-throughput network switch ASICs, high-speed SerDes, power delivery subsystems, and optical transceivers. • Demonstrated ability to isolate intermittent hardware, component, and assembly defects using structured RCA/8D approaches. • Fluent English (written and verbal); willingness and ability to travel to overseas manufacturing sites for new line deployments, PVT builds, and factory reviews. Advantages / Preferred Background • Liquid Cooling Manufacturing Experience (Significant Advantage): Practical experience with liquid-cooled hardware in a production environment, including cold-plate assembly, manifold routing, quick-disconnect handling, liquid system processes on production lines. • Proficiency in data analytics and scripting tools for automated log analysis and yield tracking. • Working knowledge of enterprise PLM systems (Agile, Arena) and schematic/layout viewers (Allegro / OrCAD).

NVIDIA Networking division is a leading supplier of innovative end-to-end InfiniBand and Ethernet connectivity solutions and services for servers and storage. We offer market-leading solutions that include adapter cards, switches, cables and software to support networking technologies. Our products optimize data center performance and deliver industry-leading bandwidth and scalability. In addition, we serve a wide range of markets, including high-performance computing, enterprise, data centers, cloud computing, big data, and Web 2.0. We are constantly reinventing ourselves to stay ahead of the market and bring groundbreaking products and services to the industry. NVIDIA is widely considered to be one of the technology world’s most desirable employers. We have some of the most talented and forward-thinking individuals in the world working for us. If you are creative and autonomous, we want to hear from you! NVIDIA Networking division is looking for an experienced NPI Engineer. What you'll be doing: • Perform DFA for products and its related jigs • Perform PFMEA for error-less implementation in a production line, while ongoingly managing product's quality in production line • Develop and validate production process for each project type, striving for ideal robustness level prior HVM • Real time-problem-solving of unknown engineering issues in the production line • Integration and matrix management as product's engine and center key for success • Establish new production lines at CM’s sites from engineering POV, while leading CM's engineering parties to excellence What we need to see: • B.Sc. in Mechanical, Industrial engineering or equivalent experience • 5+ years of relevant experience • Experience in: Leading projects at the electro-mechanical field, CMs/vendors management, and Project management, production management or quality leader at CM’s site • Excellent interpersonal and communication skills; preciseness, proactiveness, pragmatism and creativity as way of life, • Excellent level of English (reading and writing) • Business travels abroad occasionally may be required NVIDIA is committed to fostering a diverse work environment and proud to be an equal opportunity employer. As we highly value diversity in our current and future employees, we do not discriminate (including in our hiring and promotion practices) on the basis of race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other characteristic protected by law.

Description At Infinidat, a Lenovo company, we empower enterprises and service providers with cutting-edge storage platforms that redefine performance, reliability, and cyber resilience at scale. If you have a strong background in NPI processes, experience in PLM, strong self-learning capabilities, and leading tasks E2E, we’d like to meet you! The NPI engineer will be responsible for the configuration control of INFINIDAT products, and all aspects of NPI processes. Responsibilities • Building and managing Production files: BOMs, Product documentation, working instructions, and drawings. • Transfer to Production of new products - Full NPI processes. • Conducting and implementing product changes (ECOs, deviations) and configuration control, managing product lifecycle E2E. • Ongoing technical support at FTK sub-contractor's production line sites (IL and US) with existing and new products, an initiative for production line continuous improvement. • Lead the company certifications and compliance maintenance -International and sustainability. • Work closely with various departments in the company to define manufacturing procedures. Requirements • B.Sc. in Mechanical/Electrical/Industrial Engineering • At least 3 years of NPI experience. • Hands-on experience with PLM - Product BOM, Change Control Management, and Product Configuration. • Technical experience with HW components including writing working instructions and part replacement procedures • Familiarity with sustainability certificates - an advantage • Independent, assertive, and proactive approach – being able to own a task and deep dive into the relevant details surrounding it, leading projects/tasks E2E • Strong interpersonal communication skills and a real team player. • Multitasking skills to be able to work on multiple tasks in parallel. • Fluent in English - reading, writing, and speaking. • Microsoft Office tools - Excellent skills in Word, Excel, and PowerPoint tools. • Experience with CAD 2D/3D Drawing software – an advantage About Infinidat Infinidat’s enterprise storage portfolio provides global Fortune 500 enterprises and service providers with best-in-class solutions for primary storage, next-generation data protection, disaster recovery, business continuity, and cyber resilience. Infinidat’s acclaimed InfuzeOS is the one of the most flexible and complete enterprise software-defined storage architectures in the industry. We recently announced powerful enhancements, an extensive expansion, and the dynamic evolution of our award-winning G4 enterprise cyber and AI storage solutions! Not only did Infinidat win over 40 awards in 2025, but was named a Gartner® Peer Insights™ Voice of the Customer Award for Primary Storage for the 7th time!

To make electronics, you need chips, wafers, transistors, reticles, and... To make these, you must see, test and manufacture them at scale—faster and better than ever before. That's where KLA comes in. Whether you're early in your career or an experienced professional, you'll solve complex challenges, work alongside brilliant minds and help shape the future of technology. Group/Division KLA has manufacturing sites worldwide. The Global Operations (GOPS) team, comprised of Manufacturing, Supply Chain Management, Manufacturing Engineering, Installation and Quality, builds our leading-edge technology. GOPS partners with KLA's global supply base and design engineering teams to develop new products, working continuously to build better, faster and more cost-efficient solutions. What You'll Do In this role, you will play a key part in advancing business priorities by delivering high-impact work across your area of expertise. The Integration Engineer is involved in the prototype design phase and zero-series production, bringing together mechanical, motion, electronics and software sub-systems and leading system-level testing and validation, to allow performance to SPEC, stability and quality. The Integration Engineer is a critical pivot in product performance validation and quality. The job includes: • Setting the infrastructure for enabling Integrating and validating multi-disciplinary systems (mechanical, motion & motion-control, scanner/optics, electronics and software) into a complete, working product. • Leading system bring-up, integration and performance validation through the prototype, zero-series and NPI phases. • Root-cause analysis and resolution of system-level integration and motion-control issues observed on the production floor and in the field. • Building and implementing integration and validation test setups, jigs and test benches to improve integration Performance to SPEC. • Working closely with R&D disciplines, suppliers and contract manufacturers, and representing integration in design reviews (PDR, CDR) and development gates. • Using data-driven analysis and monitoring to detect, characterize and prevent recurring quality issues. • Preparing integration and production files, flows and procedures, and supporting product transfer to high-volume manufacturing (HVM). Minimum Qualifications • B.Sc. in Electrical Engineering from an acknowledged institute. • 2-3 years of experience in a similar integration position, preferably in an NPI environment with multi-disciplinary products. • Hands-on experience integrating and validating complete electro-mechanical systems at system level. • “Hands-on” orientation with strong system-level troubleshooting skills. • Excellent interpersonal skills in a multi-interface matrix structure. • Good understanding of BOM structure and procedure preparation. • Experience with motion-control systems and 3D CAD (Creo/Pro-E & SolidWorks) – an advantage • Great problem solver, team player and leadership ability. About KLA We provide advanced inspection tools, metrology systems, process solutions, and computational analytics that make electronics possible, tackling complex challenges. From electron and photon optics to machine learning and data analytics, we seek perfection at the most fundamental level of matter in the universe. If you want to make electronics that push industries forward and make the world a better place, join us. Use of AI Statement At KLA, our interviews seek to understand your individual skills, problem-solving approach and authentic thinking. To ensure a fair and consistent evaluation, the use of AI, recording tools or other technologies to generate, suggest or provide responses during interviews—whether virtual or in person—is not permitted unless explicitly approved in advance as part of a reasonable accommodation or invited by the interviewer. Use of these tools may interfere with our ability to evaluate your individual qualifications and affect your candidacy. KLA is committed to advancing innovation through responsible AI, and we value candidates who share this mindset. We offer a competitive, family friendly total rewards package. We design our programs to reflect our commitment to an inclusive environment, while ensuring we provide benefits that meet the diverse needs of our employees. KLA is proud to be an equal opportunity employer.

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world’s leading technology providers to accelerate the delivery of tomorrow’s electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Group/Division With over 40 years of semiconductor process control experience, chipmakers around the globe rely on KLA to ensure that their fabs ramp next-generation devices to volume production quickly and cost-effectively. Enabling the movement towards advanced chip design, KLA's Global Products Group (GPG), which is responsible for creating all of KLA’s metrology and inspection products, is looking for the best and the brightest research scientist, software engineers, application development engineers, and senior product technology process engineers. The Optical Metrology Division products are used for optical overlay metrology. The portfolio of products includes unique solution packages which are based on hardware and software systems to enhance yield and effectiveness. As a world leader in its field of expertise, the division's products are the most advanced in performance (measurement accuracy of nanometers and below), reliability, ease of use and compatibility with other KLA's products. KLA (Israel) controls over 80% of the world market sales in its field, and its products are used by every major semiconductor manufacturer around the world. KLA Israel is located in the Migdal Haemek Industrial Park. Job Description/Preferred Qualifications As part of the R&D department, the NPI Engineer leads the transition of new products from development to manufacturing. Serving as the primary interface between R&D and Operations, the engineer ensures successful product releases, manufacturing readiness, and effective operational execution. • Lead NPI activities throughout the product lifecycle, ensuring on-time transfer of new products from development to manufacturing. • Serve as the primary R&D point of contact for manufacturing and service. • Driving cross-functional collaboration across Engineering, Manufacturing, Supply Chain, and Service organizations. • Manage BOM structures, configuration control, engineering change orders, and release activities. • Drive manufacturing readiness through beta builds, material planning, risk management, and production release execution. Minimum Qualifications • BSC in mechanical engineering, Materials Engineering, Physics, Chemistry, or equivalent Engineering/Scientific field. • 3+ years of experience in new product introduction, Manufacturing Engineering, Operations Engineering, Product Engineering, or similar roles. • Knowledge of PLM system. • Demonstrated project and program management skills. • Ability to work independently and collaboratively in a multidisciplinary team environment. • Excellent communication skills in English. We offer a competitive, family friendly total rewards package. We design our programs to reflect our commitment to an inclusive environment, while ensuring we provide benefits that meet the diverse needs of our employees. KLA is proud to be an equal opportunity employer Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched KLA’s Careers website for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to [email protected] to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Who We Are Applied Materials is the global leader in materials science and engineering solutions that are at the foundation of virtually every new semiconductor chip and advanced display in the world. The equipment that we create and service is essential to advancing AI and accelerating the commercialization of next-generation semiconductor chips. Join us and push the boundaries of materials science and engineering in a company at the foundation of the electronics industry. The work we do together advances the world’s technology. What We Offer Location: Rehovot,ISR You’ll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible—while learning every day in a supportive leading global company. Visit our Careers website to learn more. At Applied Materials, we care about the health and wellbeing of our employees. We’re committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits. We’re looking for a passionate, sharp, and collaborative Senior E2E NPI Planner (S&OP and material planning) to drive the complete planning lifecycle of our innovative NPI products. This is a unique opportunity to join a newly formed team and set the foundations, your processes and methods will scale beyond a single product and influence the planning of additional tools across the organization. If you enjoy solving complex challenges, partnering cross‑functionally (including the business department), and owning success from early concept through tool shipment - this role is for you. What will you do? • Lead end‑to‑end planning of new products- from early business demand through material readiness, production execution, and tool shipment. • Embed early with R&D and engineering to understand product architecture, module structure, configurations, and risks. • Partner daily across functions: engineering, supply chain, procurement, sourcing, material management, production teams, the business department, and corporate stakeholders across global time zones. • Define scalable processes, R&R, and system enablement for a new team- your designs will become the planning playbook not only for NPI, but for future products as well. • Own BOM and configuration planning and ensure end‑to‑end supply chain alignment. • Present insights in steering forums: status, risks, mitigations, and data‑driven recommendations to senior leadership. • Drive material readiness, resolve constraints, and ensure smooth transitions from development to production. • Collaborate flexibly across time zones with external partners and global interfaces as needed. What you bring • 3-7 years of experience in planning, operations, or supply chain roles (experience with NPI or complex production environments — a strong advantage). • B.Sc. in Industrial Engineering or a relevant field. • Strong understanding of procurement, sourcing, planning, material management, and manufacturing processes. • Ability to dive into complex multi‑module technical products and understand detailed product structures. • Strong communication capabilities and the ability to influence without authority. • Analytical, data‑driven, fast thinker with strong problem‑solving skills. • Ability to balance daily execution with long‑term planning in a dynamic environment. • Flexibility to work across time zones when required. • Excellent English verbal and written. • Experience with systems such as SAP, Smartsheet, or similar enterprise tools. Why join us? • Build something new: Be part of creating the team’s foundational processes from the ground up. • Broader impact: The planning processes you define will extend beyond a single NPI and shape how future products are planned and executed — with a strong focus on material planning. • Work with cutting‑edge tools and highly skilled cross‑functional partners. • High visibility with opportunities to present in steering forums and influence key decisions. Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Not Specified Relocation Eligible: No Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.