Hardware Engineer jobs in Israel

Description At Altair Semiconductor, we develop advanced wireless and IoT solutions that connect millions of devices worldwide. Our engineers own significant parts of each project, becoming true experts in their fields. You'll work directly with your team from initial concept through final delivery, seeing the real impact of your work. We maintain a flat organization where ideas flow freely between engineers and leadership. Our experienced team members actively mentor newer colleagues, creating an environment where everyone can learn and grow. We're proud that our employees choose to build long-term careers with us. Many of our team members have been with the company for years, contributing to a stable, knowledgeable workplace where collaboration comes naturally. We understand the importance of work-life balance and want to make it easy for you to have time for everything you want to do. What you will be doing Hands-on, hardware engineer owning the ATE and test hardware for our cellular IoT chipset programs — DUT/load boards, multi-site test boards, HTOL/ESD and characterization setups — from requirements through bring-up and correlation, driving test-system debug to root cause. The role carries broad board-level responsibility (RF/analog front-end, multilayer PCB design, prototype bring-up) centered on test and includes international travel to debug hardware at partner and test-house sites. Responsibilities • Own ATE/test hardware end to end — DUT/load boards, multi-site boards, characterization setups — through schematic, layout, fabrication, bring-up, and correlation. • Drive test-system debug to root cause (signal integrity, board-tester interface, yield/correlation) and support device characterization and screening. • Debug on-site at partner and test-house locations, including international travel. • Design RF/analog front-end circuitry for test and evaluation: RF chains, matching networks, switch topologies, and interfaces. • Design multilayer PCBs (incl. high-layer-count with blind/buried vias) in Cadence Allegro/OrCAD, with clean, manufacturable fab/assembly outputs (Gerber/ODB++, DFM, stackup/impedance). • Lead systematic failure analysis: power sequencing, RF performance, functional validation. • Take and interpret lab measurements (VNA, spectrum analyzer, scope, power/current profiling). • Coordinate with silicon, systems, firmware, test teams, and coordinate with external vendors. Requirements • B.Sc. in Electrical/Electronic Engineering; effective cross-disciplinary communicator. • 5+ years board-level hardware design, with designs taken from schematic to validated hardware in production or high-reliability contexts. • Expert schematic capture and multilayer PCB design, ideally Cadence Allegro/OrCAD. • Direct experience designing, bringing up and debugging ATE/test hardware on the tester. • Strong bench debug and failure-analysis skills. • Solid RF/analog fundamentals (matching, impedance control, RF switching, front-end trade-offs). • Proficiency with RF and general lab instrumentation. • Willing to work on-site and travel internationally. • Solid grasp of power delivery, sequencing, and low-power design for battery-powered IoT. Nice-to-have • Experience with a specific ATE/tester family and multi-site DUT board design. • Cellular modem integration (LTE-M / NB-IoT) or comparable wireless SoC hardware. • C and/or Python for bring-up and test automation. Tools: Cadence Allegro/OrCAD; ODB++/Gerber; ATE/test systems; RF lab instrumentation (VNA, spectrum analyzer, scope).

Description Kela is a defense technology startup pioneering next-generation defense technology, from command & control software to complete field-deployed systems. We empower defense organizations with robust, scalable, and secure platforms that integrate diverse sensors and AI to deliver real-time battlefield intelligence. Backed by leading investors, Kela combines Israeli innovation with global mission impact. As a Hardware Engineer, you'll be the hands-on board designer who takes our electronics from schematic to fielded hardware. You'll own the design of ruggedized boards — power conversion, EMI/EMC front ends, interface and interlock circuits — bring them up on the bench, and carry them through qualification and into serial production. You'll work closely with systems, mechanical, and software teams, and oversee the board-design work of our subcontractors. Responsibilities • Own board design end to end: architecture, schematic, layout, fab and assembly handoff, bring-up. • Design power stages for military vehicle power: DC/DC conversion, input protection, transient survival. • Design EMI/EMC filtering and grounding to MIL-STD requirements. • Design discrete-signal and interlock circuits, including safety-related interfaces. • Select components for harsh environments, availability, and lead time; own the BOM. • Build and run board-level lab tests: bring-up, pre-compliance, environmental screening. • Own the qualification path (MIL-STD-461, MIL-STD-1275, MIL-STD-810) with external labs. • Oversee subcontracted board designers and review their deliverables. • Support the transition to serial production: DFM, test coverage, first-article inspection. Requirements • 7+ years of hands-on board design (schematic and layout) in leading companies. • BSc in Electrical Engineering. • Boards you designed reached production and shipped. • Practical power-electronics experience: DC/DC design or integration, protection circuits. • EMI/EMC design practice and pre-compliance testing experience. • Full lab fluency: scopes, electronic loads, transient generators. Advantages • Defense or military vehicle electronics background. • MIL-STD-461 / MIL-STD-1275 qualification experience. • Video or high-speed interface design experience. • Embedded compute (carrier/SoM) integration experience. • Experience overseeing subcontractors or an external design house.

Description Company Overview: Join Techmer, a daughter company of MER group, specializing in the development and manufacturing of cutting-edge products for military and defense sector. We are looking for a dynamic and skilled Electronics design Engineer to contribute to our mission in developing state-of-the-art solutions. if you have a strong foundation in hardware engineering, we want to hear from you. Key Responsibilities: • Electronics Design: Development Analog and Digital devices and systems for military and commercial applications. Schematic design, Creating a NET List for board development. Creation of BOM • End-to-End Development: Manage the entire development lifecycle, from planning to customer delivery • Bring-Up Testing: Conduct hardware and software Bring-Up tests. • System Integration: Collaborate with multidisciplinary teams to integrate hardware components seamlessly into complex systems. • Circuit Board Design: Support board design. Receiving files and preparing ation for transfer to production • Mechanical Design: Contribute to the mechanical aspects of hardware design to ensure robust and durable solutions for challenging environments. • Documentation: Preparation and writing of comprehensive ation in accordance with the requirements of standards and technical specifications. Requirements Qualifications: • B.Sc in electrical engineering • 2 years of experience in Circuit design – a must • Proficient in reading schemes and understanding complex hardware systems. • Experience with CAD software (ORCAD preference) • Competency in working with measuring equipment and precision instruments. • Understanding of CPLD and microcontrollers structure and programming. • Willingness to learn, critical thinking and ability to work in a team. • Proficiency in both Hebrew and English. • Full-time position Be a part of Techmer's commitment to innovation and excellence in serving the nation's security needs.

Description The HW Group is part of Nova's multidisciplinary R&D organization and plays a critical role in developing next-generation semiconductor metrology systems. We are looking for a Hardware Expert to lead feasibility, integration, testing, verification, validation, and qualification activities for advanced electro-opto-mechanical systems. In this role, you will be deeply involved in new product development throughout the entire R&D lifecycle, working closely with electrical, optical, mechanical, and system engineering teams to bring innovative technologies from concept to production. This position is ideal for a hands-on engineer who thrives on solving complex technical challenges, driving system-level investigations, and influencing the development of cutting-edge products. Role Responsibilities • Lead end-to-end hardware feasibility, integration, verification, validation, and qualification activities for next-generation electro-opto-mechanical systems. • Actively support new product development throughout the entire R&D lifecycle, from concept and feasibility through validation and release. • Develop and execute test plans and generate comprehensive technical reports. • Lead troubleshooting and root-cause analysis during R&D qualification activities, first production tool builds, and customer beta evaluations. • Drive system characterization and performance evaluations to validate product requirements and specifications. • Work closely with multidisciplinary teams, including optical, mechanical, electrical, and system engineering, to optimize system performance and reliability. • Lead the development of test fixtures, jigs, and supporting automation tools for R&D, Production, and Service. • Manage technical interactions with suppliers, subcontractors, and external laboratories. • Analyze experimental results and provide recommendations to support product and process improvements. • Support the transfer of new technologies and products from development into manufacturing and field deployment. Requirements • B.Sc. in Mechanical Engineering, Electrical Engineering, Optical Engineering, or a related engineering discipline from a leading university. • 3+ years of experience in the development, integration, and testing of complex electro-opto-mechanical hardware systems. • Experience working with multidisciplinary systems, such as electro-optical, opto-mechanical, robotic, or precision instrumentation systems. • Experience using MATLAB, Python, LabVIEW, JMP, or similar engineering tools for analysis and testing. • Hands-on experience with laboratory equipment such as oscilloscopes, spectrum analyzers, laser interferometers, and other advanced measurement instruments. • Strong analytical and problem-solving skills. • Excellent communication and collaboration capabilities. • Experience with optical systems is an advantage. • Semiconductor industry and capital equipment experience are an advantage. That special thing you bring: • Passion for hands-on engineering and developing advanced technological systems. • Natural curiosity and a desire to understand how complex systems operate and perform. • Strong ownership and accountability, with the ability to independently drive technical activities and deliver results. • Creative problem-solving abilities and the confidence to investigate complex multidisciplinary challenges. • A collaborative mindset and the ability to work effectively across technical disciplines. • Flexibility and adaptability in a fast-paced and dynamic environment. • Strong interpersonal and communication skills. • A continuous learning mindset and a desire to innovate and improve existing solutions. • The ability to turn technical challenges into breakthrough opportunities. Get to know us better: Nova (NASDAQ: NVMI) is a global company and a leading provider of innovative metrology solutions for process control in semiconductor manufacturing. With a team of ~1200 people in three R&D centers and 27 field offices, we bring insights into the world’s most advanced industry. We leverage multiple technology fields such as physics, optics, chemistry, and algorithms to develop hardware and software solutions that measure almost every advanced computer chip built in the world. Nova dives deep into dimensions and layers at the atomic level to extract unique insights and provide our customers with crucial decision-making data, managing critical challenges by providing unique, differentiated solutions. Our outstanding people-focused and innovative culture means every person at Nova has the power to make an impact and significantly redefine what people can achieve through technology. Join us if you are A dreamer and brilliant high aimer who sees the impossible as the starting point and loves working in a multidisciplinary global team to create innovative breakthroughs. If you need assistance due to a disability, you may contact us at [email protected]

Description Power the Future with us! At SolarEdge (NASDAQ: SEDG), we're a global leader in smart energy technology, with over 3,000 employees, offices in 34 countries, and millions of installations worldwide. Our innovative solutions include solar inverters, battery storage, backup systems, EV charging, and AI-based energy management. We're committed to making clean, green energy the primary power source for homes, businesses, and beyond. With the growing demand for electricity, the need for smart, clean energy sources is constantly rising. SolarEdge offers amazing opportunities to develop your skills in a multidisciplinary environment, covering everything from research and development to production and customer supply. Work with talented colleagues, tackle exciting challenges, and help create a sustainable future in an industry that's always evolving and innovating. Join us and be part of a company that values creativity, agility, and impactful work. Responsibilities: • Lab tests of the analog circuits using Spectrum, Scope, and other lab equipment. • Collaborate with software engineers to ensure seamless integration between hardware and software. Requirements • B.Sc. in Electrical Engineering. • 2+ years of experience in industrial/manufacturing environment • Experience in troubleshooting electrical systems and equipment Technical Skills Required: • Reading and understanding electrical schematics and drawings • Experience with testing equipment and measurement tools: Scope, DVM, Power Supply, E-Loads, Spectrum analyzer etc. • Proven understanding of Automated Test Equipment. • Programming skills in Python/C# - advantage. • Knowledge in networking, computers & operating systems. • Work closely with other departments to promote the product. • Understanding of safety regulations and procedures. • Familiarity with electronic components - characteristics and features. • Ability to work on multiple tasks simultaneously. • Fluency in English - required

Description Power the Future with us! SolarEdge (NASDAQ: SEDG), is a global leader in high-performance smart energy technology, and millions of products installed in over 133 countries. Our diverse product offering comprises intelligent solar inverters, battery storage, backup systems, EV charging, and complete home energy management ecosystems. By leveraging world-class engineering capabilities and with a relentless focus on innovation, we strive to create a world where clean, green energy from the sun is the primary source of power for our homes, businesses, and just about everywhere we thrive. Senior Hardware Engineer - Failure Analysis We are seeking an experienced Senior Hardware Engineer for Failure Analysis and Design Review position. The ideal candidate will have a strong background in analog circuit design (preferably power electronics) and digital circuits, combined with extensive hands-on experience in troubleshooting and root cause analysis. This role involves leading failure investigations, reviewing new product designs, and mentoring team engineers to ensure best practices and high product reliability. Key Responsibilities · Perform Failure Analysis on complex field issues in power conversion systems for the solar energy market. · Lead Design Reviews for new products, providing insights to improve reliability and performance. · Collaborate closely with R&D, Quality, and Manufacturing teams to resolve technical challenges. · Mentor and guide team engineers, sharing expertise in power, analog and digital circuit design. · Prepare detailed technical reports. Requirements · - Bachelor's degree in electrical/Electronic Engineering. · - Minimum 8 years of experience in analog circuit design (preferably power electronics) and digital circuits. · - Experience in Failure Analysis and a deep understanding of manufacturing and testing processes. · - High-level proficiency in technical English (reading, writing, speaking). · Preferred Qualifications · MSc in electronic engineering is an advantage. · Strong background in Power Electronics- significant advantage. · Familiarity with simulation tools such as SPICE, MATLAB – advantage. · Experience with power components (SiC, IGBT, MOSFETs, GaN) and advanced power topologies. · Excellent teamwork and technical leadership skills.

Description Shape the Future of AI Infrastructure with VAST Data This is a rare opportunity to join one of the fastest-growing infrastructure companies in tech history, right at the epicenter of the AI revolution. Recognized by Forbes as "the future of the market," VAST Data is building the foundational enterprise software powering the AI era. We engineer platforms that capture, catalog, refine, and protect massive datasets across data centers, edge, and cloud, making real-time analytics, AI training, and inference simpler and faster than ever before. Our explosive growth is fueled by relentless engineering innovation, a customer-first mindset, and a team of fearless VASTronauts who thrive on solving computing's hardest problems. Join us at this pivotal moment in technology history and make a lasting impact on how the world processes data. We are seeking a talented and experienced Software Engineer to design, build, and optimize high-performance distributed systems, core data engines, and backend infrastructure. In this role, you will be responsible for qualifying hardware components such as servers, JBOFs, SSDs, network cards, switches, and optical transceivers. You will write requirement documents for new features, work with vendors on implementation and debugging, and transfer knowledge to internal teams, including software developers, QA, support, and manufacturing. Additionally, you will become the subject matter expert for specific hardware platforms and technologies. Join us and contribute to shaping the future of data management while being part of a fast-growing, innovative company. Requirements Required Skills: Demonstrate a detailed system-level understanding of systems Previous experience in hardware design, firmware design, linux device drivers and/or QA/verification of complex systems. B.a. / B.Sc EE or CS - an advantage Prior experience in at least one of the following technical areas: PCIe: Link training, configuration space, configuration procedures by the OS, hot-plug, transport layer, PCIe switch, SR-IOV, experience with PCIe Gen.4+ an advantage. Server design: x86 CPUs, BMC, IPMI, Redfish, SMBus/I2C, BIOS, UEFI, design for high availability, thermal design. Storage systems: NVMe SSDs, NVMeoF, RAID, OCP SSDs Networking: 100/200/400/800G Ethernet, Infiniband, RDMA, NVMeoF, QoS, Flow Control, VxLANs, Optical Tranceivers, cables and DPUs Linux: Device drivers, memory management, hardware debug and test tools.

Description Our company is seeking a Hardware Development Team Lead to lead cross-functional development and integration activities across the organization. The successful candidate will oversee collaboration between all engineering disciplines, including Hardware, RF, Software, and Firmware, while serving as the key interface with the Systems Engineering team. Key Responsibilities: • Lead and directly manage a multidisciplinary engineering team developing complex systems, including Mechanical, Hardware, Firmware, and RF engineers, ensuring execution according to project plans, schedules, and objectives. • Lead end-to-end product development, including system architecture definition, technical oversight, prototype development, and design verification and validation (V&V). • Serve as the primary liaison between development engineers, the Systems Engineering team, and Project Managers. • Evaluate, introduce, and implement new development tools, methodologies, and emerging technologies. • Define priorities and allocate engineering tasks based on business needs, project requirements, and market considerations. • Establish engineering methodologies, development processes, project milestones, and required deliverables for internal design reviews (PDR, CDR, etc.). • Define engineering roles and responsibilities, recruit new team members, mentor engineers, conduct performance evaluations, and develop individualized professional growth plans. • Conduct routine management activities, including status meetings, management reviews, and project progress meetings. • Prepare technical responses for project tenders (RFPs), including technical proposals, effort estimation, and cost evaluation. • Provide technical support for both internal engineering challenges and customer-facing technical issues. • Lead internal and customer design reviews as required. Requirements At least 5 years of hands-on experience in hardware development and board design, either as a Hardware Design Engineer or Firmware Engineer. At least 4 years of experience managing multidisciplinary engineering teams of five or more engineers. Proven experience leading cross-functional engineering teams. Demonstrated ability to manage multiple projects simultaneously. Experience working directly with customers. Experience preparing technical project cost estimates and pricing – an advantage. Experience writing comprehensive technical proposals for competitive tenders (RFPs) – an advantage. Background in microwave communications, telemetry systems, and RF engineering at microwave frequencies – an advantage.

Description BA Microwaves, part of the Commit Group, is looking for a talented Hardware Board Designer to join our multidisciplinary R&D team. This is an exciting opportunity to take part in the design and development of advanced electronic systems, working alongside hardware, firmware, software, and system engineers from concept through integration. We are looking for a creative, hands-on engineer with a passion for hardware design and a desire to work on cutting-edge technologies. Responsibilities • Design and develop complex electronic boards from concept to production. • Perform hands-on schematic design and component selection. • Support and guide PCB layout activities. • Prepare and present design reviews. • Collaborate closely with firmware, software, RF, and system engineering teams to ensure successful system integration. • Develop advanced multidisciplinary systems incorporating: • CPUs / SoCs • FPGA-based designs • Analog and mixed-signal circuits • High-speed interfaces (DDR, PCIe, Ethernet, LVDS, etc.) • RF transmit and receive chains • Filters and amplifier circuits • Power supply and power management circuits • Support board bring-up, debugging, validation, and troubleshooting. Requirements Requirements • B.Sc. in Electrical Engineering or a related field. • 5+ years with proven experience in board-level hardware design. • Experience with schematic design and PCB development. • Experience designing digital and analog circuits, including high-speed interfaces (DDR, PCIe, Ethernet, LVDS, etc.). • Experience working with processors and FPGA-based systems. • Familiarity with RF circuits and power supply design – an advantage. • Strong analytical skills, a hands-on approach, and the ability to work in a multidisciplinary environment.