Embedded Software Engineer jobs in Yokneam

About Arad Technologies Arad Group is a global leader in water measurement and management solutions, committed to advancing technologies that support water conservation. With over 1,500 employees across seven companies worldwide, Arad develops and delivers end-to-end IoT and cloud-based solutions for smart cities. Arad Technologies serves as the R&D center of the Arad Group, focused on developing the next generation of innovative solutions that are manufactured and sold globally. Our mission is to address critical water challenges by designing smart systems that measure, monitor, and manage water usage efficiently - empowering communities to make sustainable water decisions in an era of growing environmental pressures. The Role We are looking for a passionate and driven Senior Embedded Software Engineer to join our Embedded Software Team. You will play a key role in designing and developing the Embedded SW that powers Arad's state-of-the-art water measurement and remote communication devices. This is an opportunity to work on next-generation IoT products, contribute to impactful innovations in water conservation, and collaborate within a dynamic, cross-functional team of engineers focused on reliability, low-power operation, and advanced wireless connectivity. Key Responsibilities Design and develop embedded software for next-generation smart water meters and IoT solutions. Maintain and enhance existing embedded software to ensure robustness, stability, and performance. Collaborate with Hardware, Hydraulic, V&V and System Engineering teams to ensure seamless integration and system-wide functionality. What We Offer The opportunity to work at the forefront of smart utility innovation and sustainability. A collaborative and purpose-driven team environment. A chance to directly influence the future of water management technology and infrastructure Success in This Role Looks Like Delivering high-performance, low-power embedded software that meets product and regulatory requirements. Proactively identifying and solving system-level integration challenges in coordination with cross-disciplinary teams. Demonstrating commitment to quality, testing, and continuous improvement. Requirements Must-Have Qualifications Hands-on experience in low-level embedded software development. Strong proficiency in C/C++ programming for microcontrollers. Deep understanding of embedded system design patterns and architecture. Familiarity with hardware protocols such as SPI, UART, I2C, and others. Experience with bare-metal or RTOS-based development. Experience using AI tools (e.g., GPT) to support and accelerate the software development process. Proven ability to lead technical efforts, mentor team members, and drive development autonomously. Strong communication and collaboration skills. Nice-to-Haves (Preferred but not Required) Experience working with STMicroelectronics MCUs and development tools. Background in developing low-power embedded applications. Familiarity with wireless communication protocols such as LoRa, Cellular, NB-IoT. Knowledge of IoT data modelling protocols such as LWM2M, DLMS, or similar. Experience with Python or C# development in Automation or related domains. Exposure to Agile/Scrum methodologies and unit testing frameworks.

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: R&D Product Development Job Sub Function: R&D Software/Systems Engineering Job Category: Scientific/Technology All Job Posting Locations: Yokneam, Haifa District, Israel Job Description: About Johnson & Johnson MedTech Cardiovascular: Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that’s reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talent for an Embedded Software Engineer role, to join our team located in Yokneam, Israel. Purpose: Embedded Developer working on firmware and driver development for the TRUPULSE generator, based on Nios II soft core IP on FPGA platforms. Works closely with the hardware team to integrate peripherals and maintain BSPs and drivers. You will be responsible for: • Develop embedded firmware in C for FPGA-based systems • Maintain and extend BSPs and low-level drivers • Integrate software with hardware peripherals • Debug system-level issues across firmware and hardware • Collaborate with hardware engineers Qualifications and Requirements: • B.Sc. in Computer Science, Electrical Engineering, or related field • Minimum 5 years of relevant experience in embedded software/firmware development • Strong C programming skills for embedded systems (pointer usage, memory management, fixed-point / bit manipulation) • Experience with bare-metal firmware or RTOS-based systems (task scheduling, interrupts, synchronization) • Experience writing and debugging device drivers (UART, SPI, I2C, GPIO, timers, ADC/DAC) • Hands-on debugging skills: JTAG, serial consoles, GDB or equivalent debugger • Version control experience (Git / TFS — branching, pull requests, basic workflows) • Basic electronics knowledge: reading schematics, voltage levels, signal basics • Familiarity with Nios II architecture, toolchain, and runtime (BSP, Eclipse-based tools, cross gcc) - an advantage • Practical knowledge of FPGA toolchains (Intel/Altera Quartus, Platform Designer / Qsys) - an advantage • Experience with debugging tools such as logic analyzers or SignalTap - an advantage • Good verbal and written communication skills #LI-AB6 #LI-Hybrid Required Skills: Preferred Skills: Agility Jumps, Analytical Reasoning, Coaching, Collaboration, Critical Thinking, Model-Based Systems Engineering (MBSE), Product Design, Report Writing, Requirements Analysis, Research and Development, SAP Product Lifecycle Management, Scripting Languages, Software Architectures, Software Development Management, Software Engineering Practices, Software Quality Assurance (SQA), Systems Development Lifecycle (SDLC), Technologically Savvy

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: R&D Product Development Job Sub Function: R&D Software/Systems Engineering Job Category: Scientific/Technology All Job Posting Locations: Yokneam, Haifa District, Israel Job Description: About Johnson & Johnson MedTech Cardiovascular: Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that’s reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talent for an Embedded Software Engineer role, to join our team located in Yokneam, Israel. Purpose: Embedded Developer working on firmware and driver development for the TRUPULSE generator, based on Nios II soft core IP on FPGA platforms. Works closely with the hardware team to integrate peripherals and maintain BSPs and drivers. You will be responsible for: • Develop embedded firmware in C for FPGA-based systems • Maintain and extend BSPs and low-level drivers • Integrate software with hardware peripherals • Debug system-level issues across firmware and hardware • Collaborate with hardware engineers Qualifications and Requirements: • B.Sc. in Computer Science, Electrical Engineering, or related field • Minimum 5 years of relevant experience in embedded software/firmware development • Strong C programming skills for embedded systems (pointer usage, memory management, fixed-point / bit manipulation) • Experience with bare-metal firmware or RTOS-based systems (task scheduling, interrupts, synchronization) • Experience writing and debugging device drivers (UART, SPI, I2C, GPIO, timers, ADC/DAC) • Hands-on debugging skills: JTAG, serial consoles, GDB or equivalent debugger • Version control experience (Git / TFS — branching, pull requests, basic workflows) • Basic electronics knowledge: reading schematics, voltage levels, signal basics • Familiarity with Nios II architecture, toolchain, and runtime (BSP, Eclipse-based tools, cross gcc) - an advantage • Practical knowledge of FPGA toolchains (Intel/Altera Quartus, Platform Designer / Qsys) - an advantage • Experience with debugging tools such as logic analyzers or SignalTap - an advantage • Good verbal and written communication skills #LI-AB6 #LI-Hybrid Required Skills: Preferred Skills: Agility Jumps, Analytical Reasoning, Coaching, Collaboration, Critical Thinking, Model-Based Systems Engineering (MBSE), Product Design, Report Writing, Requirements Analysis, Research and Development, SAP Product Lifecycle Management, Scripting Languages, Software Architectures, Software Development Management, Software Engineering Practices, Software Quality Assurance (SQA), Systems Development Lifecycle (SDLC), Technologically Savvy