Jobs in Yokneam

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: R&D Product Development Job Sub Function: R&D Software/Systems Engineering Job Category: Scientific/Technology All Job Posting Locations: Yokneam, Haifa District, Israel Job Description: About Johnson & Johnson MedTech Cardiovascular: Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that’s reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talent for an Embedded Software Engineer role, to join our team located in Yokneam, Israel. Purpose: Embedded Developer working on firmware and driver development for the TRUPULSE generator, based on Nios II soft core IP on FPGA platforms. Works closely with the hardware team to integrate peripherals and maintain BSPs and drivers. You will be responsible for: • Develop embedded firmware in C for FPGA-based systems • Maintain and extend BSPs and low-level drivers • Integrate software with hardware peripherals • Debug system-level issues across firmware and hardware • Collaborate with hardware engineers Qualifications and Requirements: • B.Sc. in Computer Science, Electrical Engineering, or related field • Minimum 5 years of relevant experience in embedded software/firmware development • Strong C programming skills for embedded systems (pointer usage, memory management, fixed-point / bit manipulation) • Experience with bare-metal firmware or RTOS-based systems (task scheduling, interrupts, synchronization) • Experience writing and debugging device drivers (UART, SPI, I2C, GPIO, timers, ADC/DAC) • Hands-on debugging skills: JTAG, serial consoles, GDB or equivalent debugger • Version control experience (Git / TFS — branching, pull requests, basic workflows) • Basic electronics knowledge: reading schematics, voltage levels, signal basics • Familiarity with Nios II architecture, toolchain, and runtime (BSP, Eclipse-based tools, cross gcc) - an advantage • Practical knowledge of FPGA toolchains (Intel/Altera Quartus, Platform Designer / Qsys) - an advantage • Experience with debugging tools such as logic analyzers or SignalTap - an advantage • Good verbal and written communication skills #LI-AB6 #LI-Hybrid Required Skills: Preferred Skills: Agility Jumps, Analytical Reasoning, Coaching, Collaboration, Critical Thinking, Model-Based Systems Engineering (MBSE), Product Design, Report Writing, Requirements Analysis, Research and Development, SAP Product Lifecycle Management, Scripting Languages, Software Architectures, Software Development Management, Software Engineering Practices, Software Quality Assurance (SQA), Systems Development Lifecycle (SDLC), Technologically Savvy

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: R&D Product Development Job Sub Function: R&D Electrical/Mechatronic Engineering Job Category: Scientific/Technology All Job Posting Locations: Yokneam, Haifa District, Israel Job Description: About Johnson & Johnson MedTech Cardiovascular: Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that’s reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talent for an Hardware Analog Engineer role, to join our team located in Yokneam, Israel. Purpose: Strong background in analog circuit design, PCB layout, and electronic engineering principles. This role involves designing, developing, and testing analog circuits for Therapeutics Medical (EP) applications. You will be responsible for: • Design and develop analog circuits, including amplifiers, filters, and power management systems. • Create and maintain schematic diagrams and PCB layouts using industry-standard software (OrCAD, DxDesigner) • Collaborate with cross-functional teams to define design requirements and project specifications. • Conduct simulations and analyses to validate circuit performance and reliability (PSPICE, LTSPICE). • Troubleshoot and resolve design issues during testing and production phases. • Stay updated with industry trends and advancements in analog circuit design. Qualifications and Requirements: • Bachelor’s degree in Electrical Engineering, Electronics, or a related field. • Minimum of 5 years of experience in analog board design. • Proficient in using circuit design and simulation tools. • Strong understanding of analog circuit theory and applications. • Experience with high-performance analog design and PCB layout techniques. • Ability to digital architecture design – an advantage. • Excellent problem-solving skills and attention to detail. • Familiarity with regulatory standards and compliance for electronic products – an advantage. • Experience with prototype development and testing methodologies. • Ability to work effectively in a collaborative team environment. #LI-AB6 #LI-Hybrid Required Skills: Preferred Skills:

Description Rapid Medical, a global leader in the development and manufacturing of advanced endovascular solutions, is seeking an experienced Sales Territory Manager to expand market presence, increase revenue, and build strong, long-term customer partnerships throughout Israel. This role is open to candidates with a minimum of 5 years of experience in medical device sales, a Bachelor’s degree (any field), and a willingness to travel internationally as required. The position is based in Israel and includes occasional travel to international conferences, with future responsibility for managing international distributors and corresponding travel. Scope & Responsibilities: • Consistently achieve or exceed sales targets • Identify customer needs and tailor solutions accordingly • Build and maintain trust-based relationships with physicians and hospital staff • Provide product demonstrations and clinical support • Negotiate with hospital purchasing departments • Stay informed on competitor activities and market dynamics • Ability to travel abroad for conferences and later on for managing international distributors Requirements Mandatory – Initial Screening Criteria: • Minimum 5 years of experience in medical device sales • Bachelor’s degree (any field) • Willingness to travel internationally as required – The role is based in Israel and includes occasional travel to international conferences. Over time, the position is expected to expand to include responsibility for international distributors, with travel accordingly. Additional Qualifications: • Experience in the neurovascular field – an advantage • Background in vascular products – an advantage • Proven sales executive experience, meeting, or exceeding targets • Ability to manage the entire sales cycle, from prospecting to closing • Strong skills in competitive product positioning • Strategic thinker with strong analytical and problem-solving skills • Excellent communication skills, including listening, negotiation, and presentation • Excellent interpersonal abilities and highly motivated • Excellent English – Both written and spoken

Description Rapid Medical is a fast-growing medical device company focused on developing, manufacturing, and selling innovative devices for endovascular interventional procedures. We are looking for an experienced Planner / Buyer to join our Operations team and take end-to-end ownership of material planning and purchasing, making sure production always has the materials it needs while keeping inventory levels balanced and healthy. This role combines planning and hands-on purchasing activities in a dynamic, regulated medical device manufacturing environment. LOCATION: Yokneam, Israel SCOPE & RESPONSIBILITIES • Own the material planning process end to end: translate demand forecasts and production plans into a procurement and material supply plan, based on inventory levels, lead times, reorder points, and safety stock • Set up the MRP process in Priority ERP, maintain it, and take full control of its ongoing operation and outputs • Execute purchasing activities, including issuing purchase orders, following up on deliveries, and ensuring on-time supply • Monitor inventory levels and incoming deliveries, proactively identifying shortages, delays, and supply risks while preventing excess inventory • Manage ongoing relationships with suppliers and subcontractors, develop a broad supplier base with alternative sources, and maintain competitive pricing, quality, and delivery performance • Collaborate with R&D during NPI and design transfer activities, including defining purchasing needs for new products and identifying suitable suppliers • Work closely with the Finance team on invoice approvals, purchase order matching, and resolving supplier payment issues • Collaborate with Production, Engineering, Quality, and Warehouse teams • Ensure purchasing activities comply with relevant regulatory and quality requirements for the medical device industry • Leverage AI tools for advanced analysis, automation, and continuous improvement of planning and purchasing processes Requirements • Bachelor’s degree in Supply Chain Management, Industrial Engineering, Logistics, or a related field – required • 3–5 years of experience in planning and purchasing roles – Must • Previous experience in a medical device manufacturing company – required • Proven hands-on experience with Priority ERP, including MRP setup and maintenance – required • Proven experience translating demand forecasts into material and procurement plans – Must • Proven ability to use AI tools for advanced analysis and automation – required • Strong negotiation and supplier management skills, with experience managing a broad base of suppliers and subcontractors – required • Working knowledge of international import and export logistics, including air and sea freight, express shipments, and Incoterms-required • High level of English, both written and spoken – Must • Excellent organizational skills, attention to detail, and a strong systems-oriented approach • Ability to work effectively in a dynamic environment, manage multiple priorities, and perform under tight timelines • Strong interpersonal skills and a service-oriented approach when working with internal and external stakeholders • A winner with a can-do mindset who takes full ownership, removes any obstacle, and creatively drives system-wide change

Description Rapid Medical is a fast-growing medical device company focused on developing, manufacturing, and selling innovative devices for endovascular interventional procedures. We are looking for a talented and creative engineer to join our R&D team and be a key player in our future development. LOCATION: Yokneam, Israel SCOPE & RESPONSIBILITIES: • Design and develop innovative neurointerventional medical devices as part of the R&D team. • Plan and execute verification tests for new prototypes and new products • Prepare product documentation, including DHF and DMR • Analyze test results and author detailed engineering reports • Collaborate with Quality and Regulatory Affairs to ensure design control compliance • Lead design transfer activities, support pilot production, and transition products into manufacturing Requirements • Bachelor’s degree in Mechanical or Biomedical Engineering from a leading university GPA 85+ • 2-5 years of experience in a relevant engineering role • Hands-on experience in the medical device industry – an advantage • Familiarity with design control processes and standards (ISO 13485, FDA 21 CFR 820) – an advantage • Proficiency with SolidWorks – an advantage • Full proficiency in English, including reading and writing technical documentation • Team player with strong communication skills, self-driven and detail-oriented

Description Rapid Medical is a fast-growing medical device company focused on developing, manufacturing, and selling innovative devices for endovascular interventional procedures. We are seeking a talented QA/RA Engineer to join our quality and regulatory team, playing a dual role that ensures our products meet the highest quality standards while navigating complex global regulatory requirements. SCOPE & RESPONSIBILITIES Quality Assurance • Manage ECOs: conduct risk assessments, update relevant DMR documents and carry out necessary IQ, OQ, PQ activities if required, finalization of implementation tasks. • Manage DCOs in the PLM system: write and update QA procedures to ensure compliance with quality standards and regulatory requirements. • Manage NCR and CAPA processes: lead, write and supervise the NCR and CAPA processes, ensuring timely and effective resolutions. • Manage QA production activities: provide quality support to production operations, addressing deviations and non-conformities to maintain high product quality. • Ensure timely resolution of quality issues: promptly address all identified or assigned quality issues to prevent delays and maintain efficient operations. • Participate in internal and external audits, such as FDA inspections and notified body audits based on ISO 13485, EU MDR, and MDSAP requirements. • Supplier Quality Management: manage supplier qualification and performance monitoring, including SCAR management, and support supplier audits. Regulatory Affairs • Prepare, coordinate, track, and follow up on submissions for medical devices across various international markets. • Prepare and manage EU MDR technical documentation submissions. • Oversee CER, PMS, and PMCF activities, including customer complaints, vigilance, and recall. • Participate in regulatory inspections and audits. • Prepare regulatory assessments for design changes. • Develop labeling according to applicable regulatory requirements. • Evaluate and communicate regulatory impact of ECOs and design changes across QA and RA domains. Requirements Education & Experience: • Bachelor’s degree in Biomedical Engineering, Biotechnology, or a related engineering/science discipline. • 4- 6 years of experience in a combined or individual QA/RA role within the medical device industry. • Hands-on experience with ISO 13485, FDA QSR 820/QMS, EU MDR, and MDSAP requirements. • Internal auditor certification – an advantage. • Knowledge and practical experience in Priority ERP – an advantage. Skills & Competencies: • High-level proficiency in English – both written and spoken. • Excellent teamwork ability and interpersonal skills. • Service-oriented mindset with strong attention to detail. • Ability to work in dynamic, multi-interfaced surroundings with both micro and macro vision. • Strong time management skills; ability to manage priorities and work under pressure. • Self-learning ability and proactive approach to problem solving. • Proficiency in Microsoft Office tools (Word, Excel, PowerPoint).

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: R&D Product Development Job Sub Function: R&D Electrical/Mechatronic Engineering Job Category: Scientific/Technology All Job Posting Locations: Yokneam, Haifa District, Israel Job Description: About Johnson & Johnson MedTech Cardiovascular: Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that’s reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talent for an Hardware Analog Engineer role, to join our team located in Yokneam, Israel. Purpose: Strong background in analog circuit design, PCB layout, and electronic engineering principles. This role involves designing, developing, and testing analog circuits for Therapeutics Medical (EP) applications. You will be responsible for: • Design and develop analog circuits, including amplifiers, filters, and power management systems. • Create and maintain schematic diagrams and PCB layouts using industry-standard software (OrCAD, DxDesigner) • Collaborate with cross-functional teams to define design requirements and project specifications. • Conduct simulations and analyses to validate circuit performance and reliability (PSPICE, LTSPICE). • Troubleshoot and resolve design issues during testing and production phases. • Stay updated with industry trends and advancements in analog circuit design. Qualifications and Requirements: • Bachelor’s degree in Electrical Engineering, Electronics, or a related field. • Minimum of 5 years of experience in analog board design. • Proficient in using circuit design and simulation tools. • Strong understanding of analog circuit theory and applications. • Experience with high-performance analog design and PCB layout techniques. • Ability to digital architecture design – an advantage. • Excellent problem-solving skills and attention to detail. • Familiarity with regulatory standards and compliance for electronic products – an advantage. • Experience with prototype development and testing methodologies. • Ability to work effectively in a collaborative team environment. #LI-AB6 #LI-Hybrid Required Skills: Preferred Skills:

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: R&D Product Development Job Sub Function: R&D Electrical/Mechatronic Engineering Job Category: People Leader All Job Posting Locations: Yokneam, Haifa District, Israel Job Description: About Johnson & Johnson MedTech Cardiovascular: Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that’s reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talent for a Logic Designer and FPGA Team Leader role, to join our team located in Yokneam, Israel. Purpose: We are seeking an experienced Logic Designer and FPGA Team Leader to lead and grow the FPGA engineering group developing life‑saving medical systems. This is a key value, strategic role with direct influence on product architecture, delivery, and safety — your work will help improve and protect the health of millions of patients worldwide. You will combine deep technical expertise in Logic Designer and FPGA/RTL design with strong leadership and cross‑functional collaboration to deliver robust, high‑quality FPGA solutions in a regulated environment. Reports to Director of Hardware Engineering and key member of architecture design for the product. Qualifications and Requirements: • Bachelor's degree or higher in Electrical Engineering or Computer Engineering • Proven experience of at least six years in Logic Designer and FPGA/RTL development and more than two years in team management • Ability to design FPGA architecture • Proficiency in Verilog and SystemVerilog • Experience in synthesis and implementation using tools such as Vivado and Quartus • Deep understanding of Static Timing Analysis, constraints (XDC/SDC), and low‑skew clocking • Hands‑on experience in hardware brings‑up: oscilloscopes, logic analyzers, protocol analyzers, JTAG, BERT • Familiarity with PCIe and SerDes protocols and experience with signal‑processing algorithms • Ability to read electrical schematics and a basic understanding of SI/PI and power/cooling requirements • Advantage: familiarity with Artix‑7 and Kintex UltraScale+ devices • Ability to lead and grow a team of FPGA designers • Proven ability for managing cross platforms and technologies #LI-AB6 #LI-Hybrid Required Skills: Preferred Skills: Business Behavior, Consulting, Critical Thinking, Design Mindset, Design Thinking, Developing Others, Electrical Engineering, Feasibility Studies, Inclusive Leadership, Leadership, Mechanical Engineering, Quality Focus, Research and Development, Robotic Automation, SAP Product Lifecycle Management, Science, Technology, Engineering, and Math (STEM) Application, Smart Systems, Technical Research

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: Quality Job Sub Function: Quality Assurance Job Category: Professional All Job Posting Locations: Yokneam, Haifa District, Israel Job Description: About Johnson & Johnson MedTech Cardiovascular: Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that’s reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talent for a Quality Engineer role, to join our team located in Yokneam, Israel. Purpose: The Quality Engineer is responsible for end-to-end quality management per product families, starting from Supplier selection and qualification, transfer to production processes and maintain supplier and process control during product lifecycle. You will be responsible for: • Supporting quality-related activities throughout transfer to production and production. • Manage Process validation/ Verification activities including Suppliers guidance with Biosense process validation requirements, planning, execution, monitoring, reporting and approval • Support change control activities through production • Support robust key production processes (CTXs cascading, monitoring tools, PFMEA Activities reduce human error etc.) • Nonconformance & CAPA investigations • Leading improvement plans with suppliers • Contributing to operations Production stabilization, trend analysis, process improvements and supplier guidance. Qualifications and Requirements: • BSc or Practical Engineer / BSc in Engineering / BA degree or Quality Assurance, CQE is an advantage Qualification in Quality Assurance (CQE, CQM or CQA) • Practical knowledge of ISO13485, experience with medical device electromechanics manufacturing companies • Demonstrated knowledge of manufacturing principles, practices and procedures #LI-Hybrid Required Skills: Preferred Skills: Business Alignment, Business Behavior, Coaching, Compliance Management, Continuous Improvement, Data Analysis, Detail-Oriented, Goal Attainment, Human-Centered Design, Internal Controls, Issue Escalation, Problem Solving, Process Oriented, Quality Control (QC), Quality Management Systems (QMS), Quality Standards

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: R&D Product Development Job Sub Function: R&D Electrical/Mechatronic Engineering Job Category: Scientific/Technology All Job Posting Locations: Yokneam, Haifa District, Israel Job Description: About Johnson & Johnson MedTech Cardiovascular: Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that’s reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talent for a Logic Designer and FPGA Tech Lead role, to join our team located in Yokneam, Israel. Purpose: We are seeking an experienced Logic Designer and FPGA Technical Lead to join out FPGA team and to provide hands-on technical and architectural leadership for FPGA development in advanced electrophysiology medical systems. This is a strategic individual-contributor role with direct influence on product architecture, technical decisions, delivery, quality, and safety. Your work will contribute to innovative technologies that improve and protect the health of patients worldwide. You will combine deep expertise in logic design, FPGA architecture, and RTL development with multidisciplinary collaboration across hardware, software, systems, algorithms, quality, and regulatory functions to deliver robust FPGA solutions in a regulated environment. Key Responsibilities • Define and own FPGA architectures and detailed design solutions for complex, real-time medical systems. • Lead FPGA development activities end to end, from requirements analysis and architecture through RTL implementation, integration, verification, hardware bring-up, and delivery. • Design, implement, and review high-quality RTL using Verilog and SystemVerilog. • Translate system requirements, communication interfaces, and signal-processing algorithms into efficient FPGA implementations. • Provide technical guidance, conduct design and code reviews, establish engineering best practices, and mentor FPGA engineers. • Drive synthesis, placement and routing, Static Timing Analysis, timing closure, clock-domain crossing analysis, and optimization for performance, power, and resource utilization. • Lead root-cause analysis and resolution of FPGA, board-level, and system-integration issues using simulation and laboratory debugging tools. • Collaborate with hardware, software, systems, algorithms, quality, and regulatory teams to ensure seamless integration and compliance with medical-device development processes. • Maintain clear architecture, interface, verification, implementation, and timing-analysis documentation. Qualifications and Requirements • Bachelor's degree or higher in Electrical Engineering or Computer Engineering. • At least six years of hands-on experience in logic design and FPGA/RTL development, including experience leading complex FPGA designs or providing technical mentorship. • Proven ability to define FPGA architecture and lead development from concept through integration and verification. • Advanced proficiency in Verilog and SystemVerilog. • Hands-on experience with synthesis and implementation tools such as Vivado and Quartus. • Deep understanding of Static Timing Analysis, XDC/SDC constraints, clock-domain crossing, reset design, and low-skew clocking. • Experience with high-speed interfaces and communication protocols such as PCIe, SerDes, I2C, and SPI. • Knowledge of signal-processing algorithms and their implementation in FPGA. • Hands-on hardware bring-up and debugging experience using oscilloscopes, logic analyzers, protocol analyzers, JTAG, and BERT. • Ability to read electrical schematics and a basic understanding of signal integrity, power integrity, power distribution, and thermal requirements. • Strong technical leadership, communication, problem-solving, and cross-functional collaboration skills. • Experience in a regulated medical-device environment is an advantage. • Familiarity with Artix-7 and Kintex UltraScale+ devices is an advantage. #LI-AB6 Required Skills: Preferred Skills: Coaching, Consulting, Critical Thinking, Design Mindset, Design Thinking, Feasibility Studies, Organizing, Problem Solving, Product Knowledge, Program Management, Project Reporting, Quality Focus, Research and Development, Robotic Automation, SAP Product Lifecycle Management, Smart Systems, Technical Research

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: R&D Product Development Job Sub Function: R&D Software/Systems Engineering Job Category: Scientific/Technology All Job Posting Locations: Yokneam, Haifa District, Israel Job Description: About Johnson & Johnson MedTech Cardiovascular: Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that’s reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talent for an Embedded Software Engineer role, to join our team located in Yokneam, Israel. Purpose: Embedded Developer working on firmware and driver development for the TRUPULSE generator, based on Nios II soft core IP on FPGA platforms. Works closely with the hardware team to integrate peripherals and maintain BSPs and drivers. You will be responsible for: • Develop embedded firmware in C for FPGA-based systems • Maintain and extend BSPs and low-level drivers • Integrate software with hardware peripherals • Debug system-level issues across firmware and hardware • Collaborate with hardware engineers Qualifications and Requirements: • B.Sc. in Computer Science, Electrical Engineering, or related field • Minimum 5 years of relevant experience in embedded software/firmware development • Strong C programming skills for embedded systems (pointer usage, memory management, fixed-point / bit manipulation) • Experience with bare-metal firmware or RTOS-based systems (task scheduling, interrupts, synchronization) • Experience writing and debugging device drivers (UART, SPI, I2C, GPIO, timers, ADC/DAC) • Hands-on debugging skills: JTAG, serial consoles, GDB or equivalent debugger • Version control experience (Git / TFS — branching, pull requests, basic workflows) • Basic electronics knowledge: reading schematics, voltage levels, signal basics • Familiarity with Nios II architecture, toolchain, and runtime (BSP, Eclipse-based tools, cross gcc) - an advantage • Practical knowledge of FPGA toolchains (Intel/Altera Quartus, Platform Designer / Qsys) - an advantage • Experience with debugging tools such as logic analyzers or SignalTap - an advantage • Good verbal and written communication skills #LI-AB6 #LI-Hybrid Required Skills: Preferred Skills: Agility Jumps, Analytical Reasoning, Coaching, Collaboration, Critical Thinking, Model-Based Systems Engineering (MBSE), Product Design, Report Writing, Requirements Analysis, Research and Development, SAP Product Lifecycle Management, Scripting Languages, Software Architectures, Software Development Management, Software Engineering Practices, Software Quality Assurance (SQA), Systems Development Lifecycle (SDLC), Technologically Savvy

About Marvell Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, and carrier architectures, our innovative technology is enabling new possibilities. At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead. Your Team, Your Impact We are seeking a Optomechanics and Thermal Engineer to join the Marvell Switch Group. In this role, you will be a key contributor to the design, analysis, and validation of high-bandwidth Ethernet switching systems, working closely with cross functional teams to ensure robust thermal and mechanical performance What You Can Expect Own the Optomechanics/mechanical and thermal design, simulation, validation, and integration of our next-generation Marvell Switch Group development and reference design systems for Data Centers for AI hyperscale customers. You will work shoulder-to-shoulder with HW, SIE, FW, Validation, and silicon teams to drive decisions on cooling solutions, power delivery packaging, structural integrity, and manufacturability, and will lead the Optomechanics-thermal engagement with our ODM and component vendors. Own the Optomechanics-thermal design of Marvell Switch Group systems (including thermal solutions and mechanical challenges on PCB / chassis/rack level). Design and execute Optomechanics and thermal experiments in the lab — from DOE through measurement, analysis, and corrective action. Debug mechanical and thermal failures; drive root-cause to closure; take previous learnings to next products. What We're Looking For • Bachelor's degree or above in Optomechanics/Mechanical Engineering or related fields and 15+ years of related professional experience. • 8-10 years of experience as an Optomechanics/Mechanical and Thermal Design Engineer in the electronics industry. • Deep knowledge of optical design for fiber-optic and copper cabling, including relevant standards, test equipment, handling, and reliability. • Solid grounding in optical principles: coupling efficiency, mode-field matching, alignment sensitivity, and loss mechanisms. • Proficiency in mechanical drawings, GD&T, and tolerance analysis (stack-up, RSS), with the ability to review and guide others (ODMs). • Advanced skills in 3D CAD (Creo preferred, or SolidWorks) and thermal simulation tools (FloEFD, Flotherm, Ansys Icepak, or similar). • Strong experience with mechanical and thermal FEA, including correlating models with measured results. • Knowledge of materials selection and coatings, including thermal interface materials (TIMs). • Working knowledge of manufacturing processes (sheet metal, CNC, skiving, brazing) and DFM/QC reporting. • Excellent written and verbal communication, including presenting to technical leadership, and a record of leading technical projects across disciplines. Preferred Qualifications • Hands-on experience with silicon photonics, optical transceivers, or co-packaged optics validation or packaging. • Experience designing sheet-metal enclosures (chassis, sleds) for data center applications. • Familiarity with test sockets (pogo-pin and elastomer) and temperature-forcing systems, and what makes their implementation succeed or fail. • Understanding of how mechanical design affects high-speed electrical performance, and experience with ECAD-MCAD collaboration (DXF/IDF exchange, PCB/PCBA design considerations). • Knowledge of industry standards such as OCP, Ethernet, PCIe, and JEDEC. 
This role is eligible to participate in Marvell's bonus and equity plans, including a new hire equity grant and annual equity refreshers, ensuring you are rewarded for your contributions and remain invested in the company's long-term success.
Additional Compensation and Benefit Elements With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. Interview Integrity To support fair and authentic hiring practices, candidates are not permitted to use AI tools (such as transcription apps, real-time answer generators like ChatGPT or Copilot, or automated note-taking bots) during interviews. These tools must not be used to record, assist with, or enhance responses in any way. Our interviews are designed to evaluate your individual experience, thought process, and communication skills in real time. Use of AI tools without prior instruction from the interviewer will result in disqualification from the hiring process. This position may require access to technology and/or software subject to U.S. export control laws and regulations, including the Export Administration Regulations (EAR). As such, applicants must be eligible to access export-controlled information as defined under applicable law. Marvell may be required to obtain export licensing approval from the U.S. Department of Commerce and/or the U.S. Department of State. Except for U.S. citizens, lawful permanent residents, or protected individuals as defined by 8 U.S.C. 1324b(a)(3), all applicants may be subject to an export license review process prior to employment. #LI-SJ1

About Marvell Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, and carrier architectures, our innovative technology is enabling new possibilities. At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead. Your Team, Your Impact The Legal Department in Israel addresses a variety of legal issues and operates as part of Marvell’s global legal team, headquartered in the United States. This team supports the company's legal needs through both local and international collaboration. What You Can Expect As a member of the legal team, you will assist with administrative and legal duties, including corporate filings, along with other legal support activities: • Manage the legal contract archive. • Conduct legal research and draft legal opinions. • Privacy related issues. • Draft legal letters and correspondence. • Review NDAs and license agreements. What We're Looking For • 2nd year law student (with at least two years remaining until graduation). • Strong academic record. • Proficient in English (reading and writing). • Strong organizational skills with an ability to learn independently. • Available 2-3 days a week (approximately 20 hours) around academic commitments. • Excellent interpersonal skills, with the ability to multi-task and work under pressure. 

Additional Compensation and Benefit Elements With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. Interview Integrity To support fair and authentic hiring practices, candidates are not permitted to use AI tools (such as transcription apps, real-time answer generators like ChatGPT or Copilot, or automated note-taking bots) during interviews. These tools must not be used to record, assist with, or enhance responses in any way. Our interviews are designed to evaluate your individual experience, thought process, and communication skills in real time. Use of AI tools without prior instruction from the interviewer will result in disqualification from the hiring process. This position may require access to technology and/or software subject to U.S. export control laws and regulations, including the Export Administration Regulations (EAR). As such, applicants must be eligible to access export-controlled information as defined under applicable law. Marvell may be required to obtain export licensing approval from the U.S. Department of Commerce and/or the U.S. Department of State. Except for U.S. citizens, lawful permanent residents, or protected individuals as defined by 8 U.S.C. 1324b(a)(3), all applicants may be subject to an export license review process prior to employment. #LI-SJ1

About Marvell Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, and carrier architectures, our innovative technology is enabling new possibilities. At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead. Your Team, Your Impact We are looking for a System Level Electrical Validation Engineer to join our Marvell Switch Group. In this role, you will be a key member of team that responsible for the validation of high bandwidth Ethernet switching ASICs. What You Can Expect • Execute and develop comprehensive functional testing of high-bandwidth Ethernet switching silicon systems to verify proper behavior, adherence to required specifications, and performance across all spec-defined conditions. • Drive the debug of complex switching silicon and system platforms with a strong emphasis on Layer-1 issues, including link-up flows, state-of-the-art SerDes, signal integrity, link stability, and analog front-end behavior. • Work closely with software developers, hardware design engineers, architects, and operations teams to investigate system-level issues and accelerate root-cause identification. • Stay current with modern automation tools, validation methodologies, and industry best practices, proactively identifying opportunities to enhance existing validation flows and efficiency. What We're Looking For • Requirements:• Bachelor's/Master's degree in Electrical Engineering, Electro-Optics, or related fields. • 10+ years of related professional experience. • Proficiency in programming languages such as Python, Java, or C#. Experience with automation and data analysis tools. • Strong understanding of high-speed SerDes and equalization techniques. • 5+ years' experience with High-Speed I/O testing, debugging, and validation. • Problem-Solving: Strong analytical and problem-solving skills, with the ability to troubleshoot and resolve complex issues. • Attention to Detail: High attention to detail to ensure accuracy and reliability of automated systems. • Communication: Excellent communication skills, with the ability to work effectively with cross-functional teams. • Advantages:• Experience with Electro-Optic systems. • Deep understanding of L1/L2 Ethernet layers and standards. • Knowledge of Memory, PCIe, and Ethernet systems interfaces. • Hands-on test and validation experience of analog/digital and signal/power integrity using lab equipment such as high-speed oscilloscopes, BERT analyzers, TDR/VNA, etc. • Familiarity with board CAD tools, including Cadence and Allegro. 
This role is eligible to participate in Marvell's bonus and equity plans, including a new hire equity grant and annual equity refreshers, ensuring you are rewarded for your contributions and remain invested in the company's long-term success.
Additional Compensation and Benefit Elements With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. Interview Integrity To support fair and authentic hiring practices, candidates are not permitted to use AI tools (such as transcription apps, real-time answer generators like ChatGPT or Copilot, or automated note-taking bots) during interviews. These tools must not be used to record, assist with, or enhance responses in any way. Our interviews are designed to evaluate your individual experience, thought process, and communication skills in real time. Use of AI tools without prior instruction from the interviewer will result in disqualification from the hiring process. This position may require access to technology and/or software subject to U.S. export control laws and regulations, including the Export Administration Regulations (EAR). As such, applicants must be eligible to access export-controlled information as defined under applicable law. Marvell may be required to obtain export licensing approval from the U.S. Department of Commerce and/or the U.S. Department of State. Except for U.S. citizens, lawful permanent residents, or protected individuals as defined by 8 U.S.C. 1324b(a)(3), all applicants may be subject to an export license review process prior to employment. #LI-SJ1

About Marvell Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, and carrier architectures, our innovative technology is enabling new possibilities. At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead. Your Team, Your Impact • The Signal Integrity Engineering Group (SIE) is a one-stop shop for all matters related to signal/power integrity (SI/PI), board design, and package design. The SIE team tailors a board and package design solution that fits every switch product according to the specific device SI/PI, performance, and cost targets and looks at each solution holistically. Looking at the holistic solution enables each of the SIE group members a unique opportunity to influence Marvell switch devices most profoundly and allows Marvell to supply our customers with the most adequate tailored end-to-end solution What You Can Expect • Be a part of developing creative power Integrity solutions for Marvell devices at package and system levels. • Evaluate designs to ensure they meet challenging electrical performance requirements. • Collaborate closely with layout engineers and IP teams to optimize power delivery network (PDN) performance. • Be a part of performing simulations, including new EDA tool evaluations, flow development, and scripting for efficiency improvements. • Be a part of developing creative signal integrity solutions for Marvell high speed device interfaces, develop and prove solution with electromagnetic simulation tool What We're Looking For • A third year + student learning towards BSc. In Electrical engineering &/or Physics in a known & recognized academic institute. • High interest in and perception of Electro-Magnetic fields, waves and distributed systems backed by high grades in the corelated courses 

Additional Compensation and Benefit Elements With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. Interview Integrity To support fair and authentic hiring practices, candidates are not permitted to use AI tools (such as transcription apps, real-time answer generators like ChatGPT or Copilot, or automated note-taking bots) during interviews. These tools must not be used to record, assist with, or enhance responses in any way. Our interviews are designed to evaluate your individual experience, thought process, and communication skills in real time. Use of AI tools without prior instruction from the interviewer will result in disqualification from the hiring process. This position may require access to technology and/or software subject to U.S. export control laws and regulations, including the Export Administration Regulations (EAR). As such, applicants must be eligible to access export-controlled information as defined under applicable law. Marvell may be required to obtain export licensing approval from the U.S. Department of Commerce and/or the U.S. Department of State. Except for U.S. citizens, lawful permanent residents, or protected individuals as defined by 8 U.S.C. 1324b(a)(3), all applicants may be subject to an export license review process prior to employment. #LI-NR1

About Marvell Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, and carrier architectures, our innovative technology is enabling new possibilities. At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead. Your Team, Your Impact Built on decades of expertise and execution, Marvell’s custom Processor/ASIC solution offers a differentiated approach with a best-in-class portfolio of data infrastructure intellectual property (IP) and a wide array of flexible business models. In this unique role, you’ll have the opportunity to work on both the physical design and methodology for future designs of our next-generation, high-performance processor chips in a leading-edge CMOS process technology, targeted at server, 5G/6G, automotive, and networking applications. What You Can Expect You will work with both local and global team members on the physical design of complex chips as well as the methodology to enable an efficient and robust design process. This position also provides an exciting platform to engage with diverse engineering challenges within a collaborative and innovative environment at Marvell. Key responsibilities include: • Work with design teams across various disciplines such as Digital/RTL/Analog to ensure design convergence and integration in a timely manner. • Implement/support designs with multi-voltage designs through all aspects of implementation (place and route, static timing, physical verification) using industry standard EDA tools. • Integrate new AI based design flows • Work with various teams to drive successful design closure. • Provide technical direction, coaching, and mentoring to junior employees and colleagues when necessary to achieve successful project outcomes. • Write scripts in Shell, Python, and TCL to achieve productivity enhancements through AI and automation. What We're Looking For To be successful in this role you must: • Bachelor’s or Master’s, degree in Electrical Engineering, Computer Engineering, or a related field. • 4+ years of progressive experience in back-end physical design and verification. • Good understanding of RTL to GDS flows and methodology. • Expertise in full-chip & sub-hierarchy integration. • Experience integrating and taping out large designs utilizing a digital design environment. • Good scripting skills in Perl, tcl and Python. • Team player with good communication skills • Experience with multi-voltage and low-power design techniques is a plus. • Experience with Cadence Genus and Innovus is preferred. 
This role is eligible to participate in Marvell's bonus and equity plans, including a new hire equity grant and annual equity refreshers, ensuring you are rewarded for your contributions and remain invested in the company's long-term success.
Additional Compensation and Benefit Elements With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. Interview Integrity To support fair and authentic hiring practices, candidates are not permitted to use AI tools (such as transcription apps, real-time answer generators like ChatGPT or Copilot, or automated note-taking bots) during interviews. These tools must not be used to record, assist with, or enhance responses in any way. Our interviews are designed to evaluate your individual experience, thought process, and communication skills in real time. Use of AI tools without prior instruction from the interviewer will result in disqualification from the hiring process. This position may require access to technology and/or software subject to U.S. export control laws and regulations, including the Export Administration Regulations (EAR). As such, applicants must be eligible to access export-controlled information as defined under applicable law. Marvell may be required to obtain export licensing approval from the U.S. Department of Commerce and/or the U.S. Department of State. Except for U.S. citizens, lawful permanent residents, or protected individuals as defined by 8 U.S.C. 1324b(a)(3), all applicants may be subject to an export license review process prior to employment. #LI-NR1

About Marvell Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, and carrier architectures, our innovative technology is enabling new possibilities. At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead. Your Team, Your Impact The SIE team tailors a board and package design solution that fits every switch product according to the specific device SI/PI, performance, and cost targets and looks at each solution holistically. Looking at the holistic solution enables each of the SIE group members a unique opportunity to influence Marvell switch devices most profoundly and allows Marvell to supply our customers with the most adequate tailored end-to-end solution. What You Can Expect • The candidate will work with Hardware, System and electrical testing engineers to drive product definition, system design for evaluation and test. The candidate should have good knowledge of the latest SERDES technologies. Interface such as PCIe Gen3/Gen4/Gen5 and 25G/50Gbps/100Gbps/ 200 Gbps ethernet. • The candidate should have a good working knowledge of power supply designs. Expertise in design for adequate signal and power integrity as well as hands-on lab measurements experience. • Drives Board design phases including architecture and design, component selection, schematic entry, board layout, board bring-up. • Be able to guide designs with ODM partners - Works closely with the internal board development, DVT and SI teams to make sure board design targets are met as well as lead the post silicon board bring up. • Provide system related inputs for device definition to be addressed by device design team - Interface with different functional groups and organizations to meet design requirements. • Leads an owns the board design process from definition to tape-out to post manufacturing bring-up. What We're Looking For • Educational background - BS and 10+ years of related experience; Degree in Electrical Engineering. • 10+ years’ experience as Electrical Engineer designing high speed digital or analog circuitry on complex high density printed circuit board assemblies including Ethernet switches, microcontrollers and processors • 5+ years’ experience in working with ODMs • 5+ years of experience in designing high density boards with fine pitch components and high density connections. – • Expertise in High Speed designs, Interfaces such as DDR4, PCIe Gen3/4, 10G/25G/ 50G/100G Ethernet, using medium to high-end CPUs (advantage) – • Good knowledge of power supply designs, hands on measurement experience - Proven track record leading small teams of design engineers to successfully complete design deliverables - Understanding mechanical and thermal components and their usage in board design is required • Familiarity with Cadence Allegro schematics and layout tools - Demonstrates good analysis and problem-solving skills. Has an inherent sense of urgency and accountability. • Grounded, detail-oriented, always backs up ideas with facts. 
This role is eligible to participate in Marvell's bonus and equity plans, including a new hire equity grant and annual equity refreshers, ensuring you are rewarded for your contributions and remain invested in the company's long-term success.
Additional Compensation and Benefit Elements With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. Interview Integrity To support fair and authentic hiring practices, candidates are not permitted to use AI tools (such as transcription apps, real-time answer generators like ChatGPT or Copilot, or automated note-taking bots) during interviews. These tools must not be used to record, assist with, or enhance responses in any way. Our interviews are designed to evaluate your individual experience, thought process, and communication skills in real time. Use of AI tools without prior instruction from the interviewer will result in disqualification from the hiring process. This position may require access to technology and/or software subject to U.S. export control laws and regulations, including the Export Administration Regulations (EAR). As such, applicants must be eligible to access export-controlled information as defined under applicable law. Marvell may be required to obtain export licensing approval from the U.S. Department of Commerce and/or the U.S. Department of State. Except for U.S. citizens, lawful permanent residents, or protected individuals as defined by 8 U.S.C. 1324b(a)(3), all applicants may be subject to an export license review process prior to employment. #LI-NR1

Description DRS RADA Technologies, a leading defense company developing and manufacturing life-saving radar systems, is seeking a Subcontractor Manager for its manufacturing facility in Beit She’an. Overall responsibility for the management, coordination, and control of subcontractor activities in Israel and abroad, including leading planning, engagement, execution, and continuous improvement processes. The role involves working with global suppliers, managing multiple internal interfaces, and ensuring compliance with quality, cost, and schedule targets. Key Responsibilities: • End-to-end management of global subcontractors. • Leading subcontractor onboarding, qualification, and engagement processes. • Building and managing work plans and resource planning. • Monitoring and controlling performance: quality and deliveries. • Risk management and identification of gaps within the supply chain. • Leading improvement and efficiency processes with subcontractors. • Ongoing collaboration with internal interfaces: Procurement, Operations, Engineering, Quality, and Logistics. • Managing and leading reports, KPIs, and analyses to support decision-making. Requirements Requirements: • Proven experience in managing subcontractors / global suppliers – mandatory. • Experience in a manufacturing / industrial environment within the electronics industry – mandatory. • High proficiency in Excel and ERP systems (Priority / SAP – advantage). • High level of English (spoken, reading, and writing) – mandatory. • Education: Relevant Bachelor’s degree – mandatory.

Description DRS RADA Technologies, a leading defense company developing and manufacturing life-saving radar systems, is seeking an experienced Production Quality Engineer with a proven track record in leading failure investigation processes for its manufacturing site in Beit Shean. Responsibilities: • Lead quality investigations for failure events and non-conformities, including root cause analysis and driving corrective and preventive actions. • Conduct internal audits, including familiarity with aerospace standards, and track and monitor identified gaps. • Analyze data and present trends and statistics on an ongoing basis. • Develop improvement plans and monitor their implementation and effectiveness. • Work cross-functionally (R&D, Engineering, Procurement, Manufacturing) with products in the NPI phase. • Prepare presentations and lead meetings with multidisciplinary teams. • Take overall responsibility for quality processes in military product manufacturing, including FMEA and MRB handling. • Read and interpret engineering specifications and technical drawings at a high level. • Utilize computer applications effectively, including presentations, with clear and concise communication in English. Requirements • Degree in Quality Engineering, Industrial Engineering & Management, or Practical Electronics Engineering (technological background – advantage). • At least 2 years of experience in quality roles (Quality Engineer or Quality Team Lead). • Background in electronic and mechanical assembly environments. • Familiarity with aerospace standard AS9100 – advantage. • Experience leading failure investigations with multidisciplinary teams. • High level of English – mandatory • Strong proficiency in Microsoft Office, including Excel and presentation tools; ability to prepare and deliver professional training materials in Hebrew and English. • Strong analytical skills, attention to detail, ability to work independently and close tasks effectively. • Ability to read and understand test documents, technical specifications, and drawings – mandatory. • Ability to write clear and concise procedures and work instructions. • Familiarity with IPC standards for electronics and mechanics – advantage. • Excellent interpersonal skills, teamwork, and ability to work across multiple interfaces. • Ability to work in a dynamic and high-pressure environment, with willingness to work overtime. • Full-time, on-site position.

Description DRS RADA Technologies, a leading defense company developing and manufacturing life-saving radar systems is seeking an SMT Technology Engineer to join the Manufacturing Engineering Department at its Beit She’an facility. The role focuses on supporting existing products and transferring NPI (New Product Introduction) products from Development to Manufacturing. The position includes support for highly complex electronic assemblies and technical support for SMT subcontractors. Key Responsibilities: • Provide engineering support for all electronic assemblies throughout the product lifecycle. • Troubleshoot issues related to electronic boards, including quality issues, manufacturing challenges at subcontractors, obsolete component replacement, and identification of suitable alternative components. • Perform failure analysis, investigate technical issues through to resolution, and provide immediate support during critical engineering issues affecting production or customer deliveries. • Lead engineering projects and manufacturing-focused initiatives, including failure analysis, cost reduction, yield improvement, and other continuous improvement activities. • Plan and execute engineering experiments to support root cause investigations and validate design changes to electronic assemblies. • Support NPI products and establish manufacturing infrastructure for serial production. • Provide technical support for PCB manufacturing and assembly processes at SMT subcontractors for both existing products and NPI programs. • Support and review Design for Manufacturing (DFM) processes for electronic assemblies. Requirements • B.Sc. in Electronic/Mechanical/Materials Engineering – Required. • Experience in the defense industry – Advantage. • Previous experience as an SMT Process Technologist/Engineer at an EMS (Electronics Manufacturing Services) company – Significant advantage. • 5–8 years of experience transferring multidisciplinary products from development to manufacturing. • Deep understanding of PCB manufacturing and assembly processes, including PCB fabrication, SMT assembly, and production troubleshooting. • Proven experience leading engineering projects within Engineering or R&D organizations, including PCB design reviews, process analysis, and implementation of engineering improvements. • Knowledge of DFA (Design for Assembly) and DFM (Design for Manufacturing) methodologies for electronic assemblies. • Strong understanding of engineering processes such as NPI, FAI (First Article Inspection), ECO (Engineering Change Order), and related processes. • In-depth knowledge of laboratory testing and validation methods, including metallographic cross-sections, Dye & Pry, and Strain Gauge testing. • Knowledge of military standards (MIL) for product qualification and manufacturing processes – Advantage. • Experience with configuration management and enterprise systems such as PLM and Priority ERP – Advantage. • Excellent presentation skills, including the ability to present engineering processes, failure investigations, and technical analysis reports. • Fluent Hebrew and English, both written and spoken. • Willingness to travel internationally on a frequent basis.